background image

78

POLICY ON ENVIRONMENTAL COMPLIANCE:

It is the intention of Humminbird® to be

a good corporate citizen and comply and meet all known and applicable environmental
regulations in the areas and countries where our products are sold. We will promote and
implement environmentally sound processes in support of national and international
regulations. 

ROHS STATEMENT:

Product designed and intended as a fixed installation or part of a system

in a vessel may be considered beyond the scope of Directive 2002/95/EC of the European
Parliament and of the Council of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.

WEEE STATEMENT:

Product designed and intended as a fixed installation or part of a

system in a vessel may be considered beyond the scope of Directive 2002/96/EC of the
European Parliament and of the Council of 27 January 2003 on waste electrical and electronic
equipment (WEEE).

CALIFORNIA PROPOSITION 65 STATEMENT:

Lead in cable jackets and boots is restricted

to 300 parts per million or less as determined by ICP-AES test methods.

531526-1_A - 747c_&_777c2_Man_Eng.qxp  10/2/2006  1:42 AM  Page 83

Содержание 747c

































































































Отзывы:

Похожие инструкции для 747c