Hummer 2007 H3, Руководство пользователя

Страница: 66 / 72

CD Player
Insert a CD partway into the CD slot, label
side up. The system will pull it in.
There will be a 12 to 15 second delay while the
CD is read, before it begins to play. When the
player begins to read a CD, the Disc Check in
Process message will appear briefly to remind
you of the delay.
If the ignition or radio is turned off with a CD in
the player, it will stay in the player. When the
ignition or radio is turned on, the CD will start
playing where it stopped, if it was the last
selected audio source.
If playing a CD-R the sound quality may be
reduced due to CD-R quality, the method of
recording, the quality of the music that has been
recorded, and the way the CD-R has been
handled. There may be an increase in skipping,
difficulty in finding tracks, and/or difficulty in loading
and ejecting. If these problems occur, check
the bottom surface of the CD. If the surface of
the CD is damaged, such as cracked, broken,
or scratched, the CD will not play properly.
If the surface of the CD is soiled, see “Care of
Your CDs” in the Index of your vehicle’s owner
manual.
If there is no apparent damage, try a known
good CD.
Notice: If you add any label to a CD, insert
more than one CD into the slot at a time, or
attempt to play scratched or damaged CDs,
you could damage the CD player. When using
the CD player, use only CDs in good condition
without any label, load one CD at a time, and
keep the CD player and the loading slot free
of foreign materials, liquids, and debris.
Do not add any label to a CD, it could get caught
in the CD player. If a CD is recorded on a
personal computer and a description label is
needed, try labeling the top of the recorded CD
with a soft marker instead.
Do not add paper labels to CDs, they could
get caught in the CD player.
If an error appears on the display, see
“CD Messages” later in this section.
66