30
– window contact, Ot – outdoor temperature sensor.
•
The display then returns to the standard view.
If 5 devices have already been taught-in to the wall
thermostat, “Err” appears on the display. In this case,
one of the taught-in devices needs to be taught-out before
a new device can be taught-in (see section 14).
14. Teaching out wireless components
Components that have been taught in on the actuator
can be taught out again using the “UnL” (Unlearn) func-
tion. All wireless components are taught out at once with
this function.
•
Press and hold down the mode button for more than
3 seconds.
•
Use the setting wheel to select the “UnL” menu item.
•
Confi rm with OK.
•
”ACC” will appear on the display; press OK to confi rm.
15. Comfort and set-back temperatures
The comfort/set-back temperature button (
) provides
an easy and convenient way of switching between these
two temperatures. The factory settings are 21.0°C and
17.0°C respectively. To adapt them, proceed as follows:
•
Press and hold down the comfort/set-back temperature
button (
) for more than 3 seconds.
•
The sun symbol ( ) will appear on the display along
with the current comfort temperature.
•
Use the setting wheel to modify the temperature; press
OK to confi rm.
•
The moon symbol ( ) will appear together with the set-
back temperature.
•
Use the setting wheel to modify the temperature; press
OK to confi rm.
