9
HUMIDIFIRST
HUMIDIFIRST “Mist-Pac”
Ultrasonic humidifier Specifications
Humidifier module and Master Panel
The humidifier shall be a packaged, self-contained ultrasonic humidifier using the
principle of ultrasonic nebulization. Each humidifier shall use a multiple of ultrasonic
transducers that vibrate at approximately 1.6 megahertz, producing a droplet size of
approximately 1 micron. Each transducer circuit shall use the “thickness vibration
method” of humidification via a piezoelectric converter. The ultrasonic transducers shall
convert the electric energy into mechanical energy, causing the water to cavitate,
resulting in the production on one micron sized water particles. The design of the
humidifier housing shall prevent larger droplets from leaving the humidifier assembly.
The humidifier shall consume no more than 33 watts per pound of humidification
generated.
The ultrasonic humidifier shall not produce any unacceptable noise. The sound level
shall not exceed 50 db at 5 feet from the humidifier module
The ultrasonic humidifier shall not require a flush cycle and shall have instant on and off
operation in order to maintain precise room relative humidity.
The humidifier housing and discharge nozzles shall be made of ABS plastic.
The system shall be pre-wired with quick connects provided to connect the Master Panel
to the humidifier module. The Master Panel will be provided with:
1.
Pre-wired humidistat with 10’cord
2.
6’ power cord with 120 volt plug
3.
10’ power/control cord to connect the Master Panel to the humidifier
Each humidifier shall have the following components:
A.
A water tube connection kit to include a set of quick disconnect service
valves to easily isolate the humidifier when servicing.
B.
Solenoid valve to control water flow into the humidifier
C.
Float switch to control water level.
D.
Float switch to provide for low water shutdown
E.
Piezoelectric crystals (transducers)
F.
On/off humidistat
