4. Remove the watch from the power supply once fully charged.
•
USB charger requirement: DC USB port(5V-500mA)
•
Charging time: Approximately 2hours
Disassembling / Assembling Your Watch
Disassembly
1.
To remove the wristbands, turn over the watch and find the quick-release lever.
2.
While pressing the quick-release lever inward, gently pull the wristband away from the
watch to release it.
3.
Repeat on the other side.
Assembly
1. To reattach the wristbands, slide the pin (the side opposite the quick-release lever) into the
notch on the watch. Attach the wristband with the clasp to the top of the watch.
2. While pressing the quick-release lever inward, slide the other end of the wristband into
place.
