Humboldt HM-2850.3F, Руководство по эксплуатации продукта

Страница: 3 / 12

Machine Specifications
Covers: CBR, UU, CU, CD, UC, Marshall and Hveem Tests.
ASTM: D1883, D2850, D2166, D4767, D5581 and D6927
AASHTO: T193, T296, T297, T208, T245, and T246;
BS 1377: Part 4: 1990, BS 1377: Part 7: 1990, BS 1377: Part 8:
1990, BS 598: Part 107
General Warnings
Safety Warnings
Operators should take care to operate this machine under the
maximum load restrictions. The machine is programmed at
the factory to provide safety shutdown if the upper or lower
maximum travel is exceeded as well as if the upper instrument
calibration is exceeded.
Electrical Warnings
Typically, there is no reason for the operator to open the
machine. However, if the customer’s engineers attempt to
change settings to the circuit board connected to the back panel,
the machine must always be unplugged before this operation.
Unplugging the internal connection to the back panel circuit
board while the machine is under power will result in permanent
damage to the circuit board.
2
Specifications
Load capacity 11000 lbf (50kN)
Speed range
0 - 2.00000 in/min.
0 - 50.80000 mm/min.
Platen Size 8" (203mm)
Platen Travel 4" (100mm)
Clearance, vertical 40" (1000mm) Max
Clearance, horiz. 11" (279mm)
Dimensions (l x w x h).
17 x 22 x 51 inch
(432 x 559 x 1295mm)
Voltage 110/220V 50/60Hz. 5.0 amps