Humbaur 1000 Series страница 24 Скачать руководство пользователя

Страница: 24 / 36

Version 2019/01

OI (Part 2): Steely, HA, Startrailer

NOTICE

Tilting after extending the prop stands!

When tilting the cargo bed, the underride protection cannot
make contact with the floor.
The prop stands can be damaged.

►

Push the prop stands up before tilting the cargo bed.

Tilted cargo bed with prop stands

1.  Prop stand
2.  Rear drop side
3.  Underride protection

Loading and unloading process

Loading / unloading a small vehicle from the cargo bed

1. Rear drop side completely open
2. Vehicle with max. 500 kg

Open drop side extensions

1. Steel grid extension
2. Tarpaulin extension

►

Open the extensions (tarpaulin, steel grid flap)

before loading / tilting the load.

Unloading (tilting)

It takes two people to unload the cargo bed.

►

Open the rear drop side completely and unhook

the support rope.

►

Climb onto the cargo bed from the back to unload the
load (vehicle).

►

Stand towards the front of the cargo bed - forwards

from the centre of gravity.

►

Have your assistant close the rear drop side and hook in
the support rope - do not lock.

►

Have your assistant unlock the cargo bed, opening

the eccentric tension locks.

►

Slowly drive the load (vehicle) off the cargo bed - the
cargo bed will tilt by itself as the weight shifts.

The cargo bed is now empty and can be tilted back and locked.

Loading (tilting back)

It takes two people to load the cargo bed.

►

Tilt down the empty cargo bed.

►

Load the cargo bed by driving the vehicle onto the cargo

bed until it automatically tilts back and rests on the

rubber buffers.

►

Have your assistant secure the cargo bed, closing the
eccentric tension locks and inserting the cotter pin.

►

Have your assistant open the rear drop side completely

and unhook the support rope.

►

Climb off the cargo bed at the back - do not

jump or climb over the drop sides.

►

Close and lock the rear drop side and

hook in the support rope.

The cargo bed has been loaded and can be transported.

Содержание 1000 Series





































Результаты поиска

Содержание 1000 Series

Отзывы:

Похожие инструкции для 1000 Series

Бренды по названию

Популярные бренды

Humbaur 1000 Series, Руководство по эксплуатации

Результаты поиска

Содержание 1000 Series

Отзывы:

Похожие инструкции для 1000 Series

Бренды по названию

Популярные бренды