11 Updating Trek Software
HumanWare may from time to time offer new versions of the Trek software. There are 2 ways to
update your Trek
’s software; wirelessly, or by downloading an update file on your SD card .
To update your Trek wirelessly, you must first have an active connection to the Internet using the
built-in Wi-Fi (see section 6.7 for more information on the wireless configuration menu). Connect
the Trek to a power outlet with the AC power adapter. Access the online bookcase by pressing the
Online
button. If the Trek announces that it is in airplane mode, activate the Wi-Fi by pressing and
holding the
Online
button to turn off the airplane mode. The Trek will automatically check for any
available update. If an update is available, press
Confirm
to start the download or cancel with any
other key. The Trek will periodically announce the download status in percentage. The download
time may vary depending on the speed of your Internet connection. Once the download is
completed, the Trek will ask your confirmation to proceed with the update. Press
Confirm
to start
the update or cancel with any other key. Again, the Trek will periodically announce the update
status in percentage. Once the update is completed, the Trek will announce the new version
number and power off. You may disconnect the Trek from the power outlet only after it has powered
off.
You can also update your Trek by downloading a UPG software update file from the HumanWare
website. Copy the UPG file to the root of an SD card. Connect the Trek to a power outlet with the
AC power adapter. Power on the player and insert the card. The update will start and report the
new version number that is being installed. The installation may take up to 5 minutes during which
the Trek will periodically announce the update status in percentage. Once the update is completed,
the player will power off. You may disconnect the Trek from the power outlet only after it has
powered off. The UPG file will be automatically deleted from the SD card when you power on the
Trek after performing an upgrade. To upgrade multiple Treks using the same SD card, be sure to
remove the card from the upgraded Trek before turning the Trek back on.
It is not possible to update from a USB flash drive since the USB port must be connected to AC
power to perform the update.
Note that a software update will also update NLS keys and Internet Radio playlists (if you have
any).
Содержание VICTOR READER TREK
