English 14
Please note:
There should only be one active transmitter within
a group! Additional activated transmitters with
the same group number will cause interference
in the sound quality.
Should a simultaneous transmission of several
transmitters be desired, please consider using
TRX-1 transceivers instead.
2.5 Adjusting input sensitivity
The sensitivity of both the inputs »MIC« und
»AUX« can be set from 00 to 05. To set the
sensitivity, press the MODE-button. The
»VOL« symbol is indicated on the display. Use
the »
« and »
« buttons to set the input level
as desired.
2.6 Power supply / recharge
The device is equipped with a rechargeable lithi-
um-ion battery of 3,7 V / 1100 mAh.
To charge the battery, plug the USB charging ca-
ble into the USB jack of the
TX-1
and connect
it to a regular USB port (computer, laptop, USB
power supply).
The red charging status LED is lit during rechar-
ge. The LED switches off when the battery is fully
loaded.
If charging of a larger quantity of batteries is re-
quired, it is possible to take the battery out of the
compartment in order to charge it in the charging
bag
RCB-20
(featuring 20 charging bays).