English 14
Setting the melody
You can choose the melody / sound
effect for each symbol:
a) First trigger a signal (e.g. operate
the doorbell pushbutton).
b) The symbol assigned to the trans-
mitter should light up and the pre-
viously chosen melody should be
heard.
c) Wait until the symbol flashes.
d) Press the melody setting button
» « until you have found the desired
melody / sound effect (you can choo-
se from 15 different sounds).
e) Once the symbol ceases to flash,
the selected melody has been assi-
gned.
Meaning of the symbols
Each symbol can be assigned to a
transmitter (e.g. the doorbell-push-
button) and can be reprogrammed as
preferred.
The symbols stand for:
Doorbell 1
green light
Doorbell 2
green light
Telephone
orange light
Person call
yellow light
Baby
white light
Fire alarm
red light
Water alarm
blue light
Alarm
red light
Checking the last signal, cancelling
the current signal
By pressing the function button »
•
«
the last registered signal can be dis-
played again.
You can also cancel a currently inco-
ming signal by pressing the function
button or the snooze button.
Transmitter battery status indicator:
The receiver alarm clock informs
about the state of the batteries within
the
signolux
transmitters. The red sta-
tus LED is located in the upper quar-
ter of the flash lens.
A low battery level of a transmitter is
indicated by the red control lamp shi-
ning together with the symbol of the
according transmitter when it’s signal
is triggered.
Please replace the batteries of the
according transmitter as soon as pos-
sible.
