manualshive.com logo in svg

Humanscale QuickStand Under Desk, Руководство по установке

Поделиться
Скачать
Humanscale QuickStand Under Desk Скачать руководство пользователя страница 11

11

TIPS FOR UNINSTALL ATION

Removing Plastic Cover (Monitor Stand)

To remove the plastic covers, pull up on the area shown in the image.

Locking Down the Tube

Removing Plastic Cover (Cable Cover)

Place a plastic sheet on the tab shown in the image and  
strike it with a hammer.

* You may damage the plastic tab if you use a flathead screw driver.

Removing plastic cover (monitor stand)

To remove the plastic covers, pull up on the area shown in the image.

Removing plastic cover (cable cover)

Place a plastic sheet on the tab shown in the image and strike it with a 
hammer. 
*    

You may damage the plastic tab if you use a flathead screw driver.

Removing plastic cover (monitor stand)

To remove the plastic covers, pull up on the area shown in the image.

Removing plastic cover (cable cover)

Place a plastic sheet on the tab shown in the image and strike it with a 
hammer. 
*    

You may damage the plastic tab if you use a flathead screw driver.

Locking down the tube

 

1.Push the tube all

the way down and

continue holding it

2-5.

2. While holding the

tube down, look for the

locking mechanism (red

colored).

Содержание QuickStand Under Desk













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды