Humanscale Quick Stand Lite Скачать руководство пользователя страница 7

Страница: 7 / 8

STEP 12

Adjust Monitor Arm Tension

•

Adjust the tension of the M8 arm using a 5mm

hex key to match the weight of the monitor(s).

•

Turn clockwise for heavier weights and

counterclockwise for lighter weights.

STEP 13

Adjust Keyboard Platform Location

•

Loosen the clamp feet and reposition the base

so that the keyboard platform sits in the desired

location, then re-tighten the feet.

STEP 14

Set Keyboard Platform Angle

•

Lift the release lever on the lower arm

(fig. G) and press the keyboard platform

flat against the desk surface.

•

Press to the lever back down tightly

to lock the platform angle.

Содержание Quick Stand Lite

Страница 1: ...INSTALLATION INSTRUCTIONS ...

Страница 4: ...the plastic cable cover from the base and remove the 180 stop screw STEP 4 Insert M8 Arm Place the M8 arm into the socket on the base and re insert the 180 stop screw STEP 5 Prep Lower Arm Remove the plastic cable cover from the lower arm ...

Страница 5: ...late STEP 7 Attach Lower Arm to Base Remove the 180 stop screw from the M8 arm head fig E Place the lower arm with keyboard platform into the M8 arm socket and re insert the 180 stop screw fig F STEP 8 IF CONFIGURED WITH A CROSSBAR Attach Crossbar Attach the monitor crossbar to the upper arm using 2 M5 x 14mm screws and one M6 x 14mm screw E F ...

Страница 6: ...untersink screw STEP 10 Attach VESA Plate Attach the VESA plate to your monitor s using four M4 x 8mm pan head screws If necessary use the included plastic spacers and extended screws STEP 11 Attach Monitors Slide the monitor s onto the monitor quick release until it snaps into place Single Monitor Dual Monitors ...