Humanscale MedLink Pro Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 66

background image

The Temporary Patient Drawer Assignment process is triggered during the AutoScan

TM

(Barcode-Assisted Drawer Assignment)

process when the scanned Patient barcode is not found in the ADT feed. The system is unable to fully link a Patient to a Drawer,
so this process allows a Drawer to be temporarily Assigned to the Patient using their barcode - and importantly, allowing Scan
to Open functionality for that Drawer – until the Patient is detected in the ADT feed.

1. This process is initiated by scanning a Patient barcode who is not recognized in the ADT feed. A warning screen is

displayed, and you are prompted to create a Temporary Patient.

Click Continue button.

2. Fill out the Temporary Patient form and click Save button.

Note:

The scanned barcode is registered. The system checks the barcode against the ADT feed and when Patient is

recognized in the database the status changes from Temporary Patient to regular Patient.

5.13.4 TEMPORARY PATIENT ASSIGNMENT

Figure 55 – Patient Is not detected on cart

Figure 77 – Temporary Patient Form

61

Return to Table of Contents

«
...
59
60
61
62
63
...
»

Содержание MedLink Pro



































































Отзывы:

Нет отзывов

Похожие инструкции для MedLink Pro

Бренд: Eclipse Combustion Страницы: 46

Бренд: Bard Страницы: 2

Infield Rascal Pro

Бренд: ABI Attachments Страницы: 8

Бренд: Abicor Binzel Страницы: 84

Бренд: ABI Attachments Страницы: 5

Бренд: abem Страницы: 47

Бренд: Abely Страницы: 5

Sportsound SSR-200

Бренд: Daktronics Страницы: 5

Бренд: Haag-Streit Страницы: 18

Бренд: Haag-Streit Страницы: 20

Бренд: V-TEK Страницы: 2

Бренд: V-TEK Страницы: 112

Бренд: Kamikaze Страницы: 112

Бренд: KAM Страницы: 2

Бренд: Fenton Страницы: 16

Бренд: Kärcher Страницы: 88

9NP-B7524 Series

Бренд: Nautilus Страницы: 2

Be strong NS 700X

Бренд: Nautilus Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды