15
LNX-204 (Ver.1.1)
[Extension]
Item
Contents
Pack control
Enable/Disable
Select to enable pack control.
Two packing algorithms define how and when packets are sent to the
network. The standard algorithm is optimized for applications in
which the unit is used in a local environment, allowing for very small
delays for single characters, while keeping the packet count low. The
alternate packing algorithm minimizes the packet count on the
network and is especially useful in applications in a routed Wide
Area Network (WAN). Adjusting parameters in this mode can
economize the network data stream.
The default setting is disable.
Idle gap time
Select idle gap time from 12, 52, 250 or 5000 msec.
After this idle gap time with no response from a serial device, data is
packetized and transmitted to the target. The default setting is 12.
Trigger character
Select packet size and set trigger character (hexadecimal digits).
Check sum
Select check sum size.
