6
Headline
Before first use, remove the transparent
protective foil from the battery.
2.1 Replacing the Battery
The battery is located inside the meter.
Use only 3V lithium batteries (CR2032).
Do not use with different types of
batteries, as this may damage the
electronics of the meter.
Instructions
1.
Remove the back cover by pulling it to
the side.
2
. Insert a new battery into the battery
socket with the “+” side facing up.
3.
Replace the battery cover.
2.2 Set Date, Time and Units
The setup has to be completed before
first use or after a battery change. Press
and hold the “Set” button for at least
two seconds. The meter will beep once
and enter the setup mode.
In setup mode, the LCD screen of the
meter shows all setting options conse-
cutively, starting with a flashing year
number:
1. Set the Year
A.
When the meter enters setup mode,
the year will flash on the screen.
B.
Click the “M” button to advance in
one-year increments to set the correct
year.
C.
After setting the desired year, click
the “Set” button again, and the meter
advances to the month setting.
2. Set the Month
A.
Click the “M” button until the correct
month appears.
1
2
3
Chapter 2 Meter Setup
