Human Elisys Quattro, Руководство пользователя

Страница: 49 / 88

Performing a Test Run
ELISYS QUATTRO User Manual HUMAN 4-17
4.4.5 Plate Loading
4.4.5.1 Plate Loading
At this point the system does only recognise if a holding frame has been load-
ed!
Plate loading may be started as soon as all reagents
are available in sufficient quantity.
The plate compartment LED lights up green, the dia-
logue box depicted to the right appears on the moni-
tor. Open door and place test plate (position A1 on
the rear left) with the holding frame correctly on the
plate transport unit
(see chapter 5.1 on page 5-1) .
1. Enter the plate name in the field Plate ID.
2. Click on the OK button.
The test plate is first moved into the photometer to
check for an adequate strip filling for the perform-
ance of this assay. Then the plate is placed on the
pipettor station. The plate transport unit moves back
to the home position and the Load Plate dia-
logue box requests the 2nd plate.
3. Repeat procedure until all plates of the worklist
have been inserted.