1. Place the armrest into position and, if you are installing a left-hand armrest, connect the armrest cable to the electric recline cable.
2. Insert and hand-tighten the screws/washers that hold the armrest in place.
NOTE:
The smaller washer installs on each screw
before the larger washer.
CAUTION:
Be careful not to drop the screws into the chair arm, as you will need to turn the chair upside-down to
retrieve the screws from inside the armrest.
3. Tighten all screws using a 4 mm (5/32") Allen Key.
INSTALLING THE NEW ARMREST
2
Please send any questions or comments regarding these instructions to:
© 2007
Human Touch
™
, LLC.