SERVICE LEVEL: 2
Tools required:
4 mm (5/32") Allen Key, flat-head screwdriver, nail clipper or other instrument suitable for cutting zip ties
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
1
PC-085IS-AR-A0
REPLACING AN ARMREST
PC-085
1. Using a flat-head screwdriver, pop out the inside side panel (it is connected to the chair using three plugs) (Fig.1).
2. If you are replacing the left-hand armrest, locate the cables connected inside the armrest, then disconnect them (Fig.2).
NOTE:
If there is a zip tie in the way, cut and remove it.
3. Using a 4 mm (5/32") Allen Key, remove the two screws that hold the armrest in place (and their washers), then remove the armrest
from the chair (Fig.2).
(Fig.1)
(Fig.2)
Side panel
3 plugs
REMOVING THE ARMREST
Cable