7
humantouch.com
6
get
ready
5. Attach the head pillow.
Align the head pillow with the upholstery window on the front
of the backrest pad, then attach the head pillow straps to the
backrest pad using the hook-and-loop fasteners.
4. Attach the backrest pad.
Place the backrest pad into position, then attach the
top flap to backrest using the hook-and-loop fasteners
(A). Attach the two side flaps to the backrest using the
hook-and-loop fasteners (B).
From the front of the chair, tuck the bottom of the
backrest pad behind the seat (C). From behind the
chair, press the backrest release lever to release the
backrest from the base, tip the backrest forward, then
secure the bottom backrest flap to the underside of
the chair using the hook-and-look fasteners (D).
A
C
B
D
7. Raise the manicure trays.
To raise the manicure trays, simply
pull gently upward until the tray locks
into place (A). To lower the tray, pull
downward on the release handle on
the underside of the chair (B).
A
B
6. Attach the manicure tray with control panel.
1. Locate the left-hand manicure tray (wide end of the tray
toward the back of the chair).
2. Place the control panel on top of the manicure tray
mounting bracket, aligning the holes.
3. Install the four Phillips-head screws (provided) to secure
the control panel to the manicure tray.
Control panel
Control panel cable
Left-hand manicure tray
4. Route the control panel cable as shown.
5. Connect the control panel cable to the corresponding cable on the underside of the armrest.
6. Place the mounting bracket into position underneath the armrest, aligning the holes, then secure the mounting
bracket to the armrest using the two screws (provided).
7. Repeat step 6 to install the right-hand manicure tray.
Control panel
Mounting bracket
Armrest
Control panel cable
