THIS MANUAL MAY NOT BE REPRODUCED IN PART OR IN WHOLE
WITHOUT THE WRITTEN PERMISSION OF THE PUBLISHER.
USER MANUAL
ASSEMBLY
Remove the height adjustment
screws from handles.
Slide handles into frame and
insert height adjustment screws to
desired height.
Place screw head through the
adjustment hole from the inside of
the walker frame (be sure the hex
screw fits into cut out in plastic
collar.
From the outside of the frame
tighten the black adjustment knob
onto the screw.
Slide the backstrap into the clamp.
The padded side of the backstrap
faces the inside of the walker (your
back should rest on the padding
when seated).
Secure backstrap into position
with screw and nut.
Add the basket to the crossbar
supporting the seat using the
hooks.
Brakes must be in the parked/locked position
before sitting on the walker!
Caution: DO NOT overload basket.
Maximum Load: 10lb/5kg
OPENING/FOLDING
TO FOLD
PULL UP
on the
nylon strap located
in the middle of the
seat.
PUSH DOWN
on
the seat to lock into
place.
IMPORTANT!
If using the walker partially
folded, ensure all four
wheels rest firmly on the
ground.
CAUTION!
Never sit on the seat unless
it is locked into place and the
brakes are in the parked/
locked position.
PULL APART
push handles
to open the walker into the
proper walking position.
Raise the walker to rest the
rear wheels while pulling
apart.
CAUTION!
Do not drop your weight
onto the seat as this may
cause damage to the seat
and its components.
Ensure that all bolts are securely fastened before
using the walker!
