producing technology for health
9-
Instructions for Use
Before using the bed, carefully read all the instructions on the push button
panel controls. Correct control learning will ensure proper and safe bed use.
Prior to enabling the various bed movements, make sure that the patient
does not have his/her arms located in any opening, for example in the
protection safety sides or bed ends.
Power supply
Connect the beds mains cable to a wall socket. The beds motors are driven
by a low voltage system (24V). The system is powered via a transformer
built into the electronics box.
- Check that the mains cable is not pinched or stuck.
- If the power is to be interrupted to the bed, unplug the
mains cable from the wall socket.
Locking the wheels
The bed is equipped with diagonally lockable wheels. Press the bar that is in
the end of the bed.
Press the bar down= lock
Pull the bar up = directional lock
Hold the bar in a horizontal position = neutral
