Hülsta hs.480, Важная информация о продукте

Страница: 32 / 36

hs.480
Assembly instruction
5. Alignment
Finally, align the joins parallel to each other.
Assembly of base
The H-XL-ASO model (seat height 42 cm) is supplied with temporary feet at the bottom of
the back for technical reasons. To dismantle and assemble the feet, place the model on
its side (use a soft support with hard flooring!) Remove the temporary feet (you will need
a size 5 Phillips screw driver) and you will find two feet with a plastic covering in the
enclosed assembly bag. Position the foot so that the screw fits into the hole. Then fix the
screw tightly in place and put the plastic covers on top of the feet. Stand the model up
on its legs and position where it will stand. Then link the connecting blades together.
hs.480
Function
Adjustment of RUK-MA-V
The back mat is fitted with a friction device in the top section. Stepless adjustment to
several positions is possible.