Huka CRATOS, Руководство пользователя

Страница: 33 / 36

33
11.2 Tightening various parts
It is essential that crucial parts of the bike are tightened properly. These parts should
be tightened with the right torque. In following table these torques are specified.
Part Torque (Nm)
Bolt for handlebar 40
Bolt for steering post 20
Bolt for seating 24,4
Bolt for back wheel 8,4 using Locktite
Bolt for front wheel 27
11.3 Parts replacement
Turn to your Huka dealer for replacement of parts.
For replacement of inner- and outer tubes, use sizes as given below
Inner- and outer tube front wheel:
55-507
Inner- and outer tube rear wheels: 55-406
11.4 Huka-dealer maintenance
You should have your three-wheeler checked by an authorised Huka dealer at least
once a year. They will check the working, safety, and wear and tear of your
threewheeler.
Contact your Huka dealer immediately if you notice a defect or malfunction.
.
Contact your Huka dealer immediately in the case of a defect.
Use the bike as little as possible until the defect has been
repaired.
If you or someone else tries to fix the three-wheeler, you run
the risk of not doing the job properly. This nullifies your
warranty.
Always replace parts with original Huka parts. Your Huka
dealer can order and replace these for you.
Not tightening with the right torque can cause dangerous
situations.