HD-A60X Series Asynchronous-Synchronous operate manual
3 / 16
The rights subject to Shenzhen Huidu Technology Co.,Lted
Chapter 3 Hardware connect
1.
The Controller HD-D10/D20/D30 connect Hub
Using the HUB connected with HD-D3, like HUB08 etc
2. Network connected
◆
Direct to the pc by the network cable
Also can connect with Router, then via Router connected PC
◆
Network cable use the 568B
The 2 network port can be change of Receiving card
4. The power charger
◆
The power charger voltage it is 4V-5.5V
when power on, the “POWER”
is bright, “RUN” and “DISPLAY” is flicker.