hugo Scooter, Руководство пользователя

Страница: 24 / 32

24
Inspection and Maintenance
Inspection
• Clean the scooter with a damp cloth and dust down approximately once a week to
preserve the appearance of the scooter.
• Adjust the tiller height and return it to the original position once a week to ensure the
parts adjust easily when required.
• Check for signs of wear and tear on the tires and the upholstery on a regular basis.
• For optimum performance and to increase the lifespan of your scooter, it is
recommended that you have your scooter serviced once a year.
Battery and Tire
Battery
Refer to the section entitled “Batteries” in “Battery Charging And Care”.
Tires
The condition of the tires depends on how you drive and use your scooter.
•
Check the tread depth regularly.
• Replace the tires when the tread depth is less than 0.5 cm.
ATTENTION
1. When tread depth is below 0.5 cm it can easily lead to vehicle slippage, making
braking distances longer. Therefore replace the tires as early as possible when they
are found to have insufficient tread depth.
2. This scooter comes with solid tires, there is no need to check tire pressure.
Maintenance
• You must maintain the scooter frequently if you tend to drive on grass, sand, or gravel
or other adverse surfaces.
Do not use water, oil or other chemical solutions to clean your scooter.
Storage
Make sure the scooter is stored under the following conditions:
•
Ensure the scooter is switched off.
• Ensure the charger is disconnected when not in use.
SUGGESTION
Store the scooter in a location where it is out of direct sunlight, rain, or dew. When
storing for a long time, charge the battery to full power and then disconnect the battery
terminal. For details ask your dealer.