7
first ride and brake gently to familiarize yourself with their operation. Front brake lever is located at
the left side of handle bars, the rear brake lever is on the right side.
If you have assembled and inspected the electrical kick-bike before the ride, turn on the power switch or key
by turning to “on” position. The battery indicator on the handle bars turns on and the electrical kick-bike is
prepared for the ride.
Notice: prior to every ride check the fastening of all screws, pressure in the tires
and brakes!
Notice: when you accelerate on full throttle from stopped position, you shall
expect that the motor power could imbalance you. To limit this risk we
recommend to use the accelerator after setting the kick-bike into motion by your
foot.
USING ALARM
Electrical kick-bike is equipped with the acoustic theft protection device, an alarm. The alarm is activated by
turning the start key to OFF position and pulling of the key out of the kick-bike. Alarm sound is activated at
the moment when the control unit notices that the rear wheel has turned. To disable the alarm, insert the
key and turn it to ON position.
The alarm is powered from the kick-bike battery and requires no maintenance. Alarm is not functional when
the battery is completely depleted.