7
D
Mobile rechargeable battery LED lamp flexible
Operating Instructions
SwItCHING tHE LAMP ON AND OFF:
Press the (B) button to turn on the lamp. By pressing the (A) button, the brightness can be set to
100% or 50%.
When selecting 50%, the service life of the lamp extends in comparison to the 100% setting as it
consumes less energy.
Press the (B) button again to turn the lamp off.
BAttEry StAtUS DISPLAy (C):
Displays the current charging status of the battery, or, how much energy is still available. If all
4 LEDs are lit, the battery is fully charged. If the battery is nearly empty, the LED blinks 5 times
and the battery status indicator blinks continuously. Then the lamp will remain lit for approx.
5-10 minutes, before the deep discharge protection shuts the lamp off. This provides sufficient
time to replace the battery or stop working.
CHArGING DEVICES wItH A USB CHArGING CABLE (E�G�SMArtPHONES):
Suitable for products with a charging current of max. 2000 mA. To charge the depleted unit,
connect a USB charging cable to the USB charging port (D) under the cover on the battery.
After charging, put the cover back on.
CHArGING tHE BAttEry:
• To ensure optimum functionality, we ensure completely discharging the battery during initial
use and then fully charging it.
• The charging socket (E) is under the cover on the battery.
• The battery charging status can be determined by reading the battery status (see description
above). If all 4 LEDs are lit, the battery is fully charged.
• The lamp can be operated while charging, however, it is not possible to use the USB output while
charging the battery. In order to charge the battery, the lamp is only operated with reduced
illuminance while charging. The time required to charge the battery increases significantly in
this operating mode.
• The battery can also be charged separately from the lamp, see also the "Replacing the battery"
section.
• If the lamp is not in use for longer periods of time, charge the battery approximately every
3 months to ensure a long battery life.
• After charging, make sure to close the charging port with the cap.
D
E
50%
100%
ON
OFF
50%
100%
ON
OFF
B
A
C
Mobile Akku Chip LED-Leuchte flexible 0487256_V7.indd 7
09.10.15 13:47
