Hughes HX200, Процедура установки

Страница: 8 / 18

8
NOTE: Record the IP Addresses displayed on the screen. If the HX200 LAN port is configured for a
static IP Address and DHCP is disabled, you will need these IP Addresses to configure your laptop IP
Address in order to access the HX200 later in the procedure.
The unit will download a series of configuration data.
34. When the Terminal Reset screen is displayed Select Close. The unit will reset.
35. Once the unit has completed the reset, log back into the System Control Center using your
laptop Web browser. Your laptop IP Address may need to be configured at this time if the HX-
200 LAN configuration does not have DHCP enabled. You may also need to enter the LAN 1 IP
Address of the HX200 in the browser URL field.
36. Select the System Status button and monitor Software Download Status.