Hughes HN9800, Руководство по установке

Страница: 51 / 66

Chapter 6 • System Control Center
1039707-0001 Revision A
51
Transmission Information page
The Transmission Information page shown in Figure 39 displays information about
data transmissions from the satellite modem.
Figure 39: Transmission Information page
The following table gives an explanation of the parameters on the Transmission
Information page.
Table 6: Transmission Information page parameters
Parameter Explanation
Transmit Status Indicates if the transmit data path is operational. Click the displayed
TxCode for explanation of the displayed code. Number of frames
transmitted to the satellite.
Number of Successful
Transmissions Number of frames transmitted to the satellite.
Number of Failed Transmissions Number of frames that could not be sent. A continuously increasing
value indicates a transmission problem. If a low value is displayed and
does not increase, and the system is functioning, there is no reason for
concern.
Number of Packets Submitted for
Transmission Total number of data packets queued for transmission to the satellite
since the modem was last restarted.
Examining transmit status
You can check the Transmit Status parameter to find out if the transmission data path
is operational or if there is a problem. Normal transmit status is indicated by the
message Transmitter ready. (
TxCode 8)
.