Hughes HN9500, Руководство по установке

Страница: 98 / 136

System Information page
The System Information page shown in Figure 51: Terminal Status page (top part) on page 84
provides system information for the satellite router such as ST name (router name), Site ID (Site
Id), and operational software version.
Figure 52: System Information page (top part)
The operational parameters listed on the System Information page are shown in a tabular format.
The first (left) column identifies the parameter categories:
• Identification – Contains system ID information such as Site ID (installation site ID) and
ST name (a unique name that identifies the satellite router).
• Software – Contains version information on the various software applications resident on
the satellite router such as commissioning and operational software.
• Satellite – Contains information pertaining to communication with the satellite such as
antenna size, transmit radio wattage, and uplink transmission mode.
• Addressing – Contains addressing information such as LAN port address and subnet mask
and available public IP addresses (if any, depending on your service plan).
• Software Features – This section lists the optional features and provides information on
whether they are currently active. These features are enabled or disabled according to the
customer’s service offering. The customer cannot use the satellite to change these features.
Typical values for System Information parameters
The following table lists typical values and the range of values for parameters on the System
Information page. This information may help you understand the values displayed by a customer’s
satellite router.
HN9500 Satellite Router Installation Guide
84
1037736-0001 Revision G
System Control Center Chapter 9