Figure 56: Mac Network screen
3.
Ensure that the TCP/IP tab is selected.
4.
Select
Manually
from the Configure drop-down list as shown in
from the configure drop-down list
on page 67.
Figure 57: Select Manually from the configure drop-down list
5.
Select the desired IP address. There may be only one address available or a range of available
addresses, depending on your service plan.
For additional information, see
Understanding the modem address and computer address
on page 53.
6.
Click
Apply Now
to close the screen and complete the configuration.
Configuring proxy settings
If your web browser cannot connect to the Internet, check the browser's proxy settings. If the
browser is configured for the computer to use a proxy server to connect to the Internet, try
changing the setting to
not
use a proxy server.
These steps explain how to configure Internet Explorer to not use a proxy server.
1.
Turn the computer on and open Internet Explorer.
2.
Select
Tools
→
Internet Options.
67
HN9200 Satellite Modem User Guide
1038623-0001 Revision B
Appendix A
Computer settings
