Satellite modem status
Appearance
LED
Receiving data
Blinking
Condition preventing receipt of data
Off *
Ready to handle user traffic
On
System
Virus protection blocking data
Blinking *
Condition preventing full operation
Off *
Power is on and the modem is functioning normally
On
Power
Operating with
fallback.bin
(backup) version of software
Flashing
Modem is not commissioned or has lost its configuration data
Blinking
No power
Off *
Bold type
indicates LED appearance during normal operation when the satellite modem is transmitting or
receiving data.
*Indicates an operational problem.
If it appears the LEDs are not functioning properly, make sure you have the correct power supply.
Refer to
on page 52 for detailed power supply information.
LAN port LEDs
Green and orange LEDs on the LAN (Ethernet) port on the modem’s rear panel indicate link
status and speed, as explained in
on page 29.
Figure 25: LAN port LEDs
Using LEDs for troubleshooting
For information on using the satellite modem’s LEDs for troubleshooting, see:
•
Using the front panel LEDs for troubleshooting
on page 43
•
Using the LAN port LEDs for troubleshooting
on page 48
29
HN9200 Satellite Modem User Guide
1038623-0001 Revision B
Chapter 3
LEDs
