Chapter
2
Antenna parts and recommended tools
This chapter identifies the main components and parts provided with the
AN9-074-G Ka-band antenna kit. It also provides a list of required tools you will
need to successfully perform the installation.
Antenna kit components
Note:
The radio assembly is shipped separately from the rest of the antenna and
may not arrive at the same time.
Once you receive the antenna equipment, unpack and inspect the components and
hardware to ensure all parts have been received in good condition.
Metal components may contain sharp edges. Use care when unpacking and
handling antenna parts.
If any parts appear to have been damaged in transit, immediately contact the
freight carrier. If any parts appear to be missing or damaged, but not as a result of
handling in transit, contact your dealer or distributor.
Note:
To avoid potential damage, leave all components in their protective
packages until required.
The main components of the antenna kit are:
•
Az/El mount assembly
•
Reflector bracket and tilt plate
•
Antenna reflector
•
Feed support arm
•
Radio assembly (shipped separately) with feed horn attached
The following sections describe and illustrate each component of the antenna kit.
Chapter 2 • Antenna parts and recommended tools
1039384-0001 Revision C
15
