Hughes AN6-074S, Руководство по установке

Страница: 30 / 72

Chapter 3 • Assembling and installing the antenna
12
1036469-0001 Revision D
Attaching the polarization
plate
Assemble the polarization adjustment assembly by attaching the
polarization plate to the front of the elevation bracket, through the
reflector bracket, as shown in Figure 8.
1. Place the polarization plate into the circular hole in the
reflector bracket, as shown in Figure 8, with the raised outer
edge of the polarization plate facing away from the elevation
bracket .
2. Pass four 5/16-in. x 3/4-in. carriage bolts through the
polarization plate and through the front of the elevation
bracket.
Note: You may need to rotate the polarization plate until it
snaps flush.
Figure 8: Fastening the polarization plate to the elevation bracket
Reflector
bracket
Polarization plate
Elevation
bracket
Polarization plate
bolts (4 total)
Raised outer edge of
polarization plate