Hughes 9250 Скачать руководство пользователя страница 8

8

3500145-0001 Revision A

Step I: Connecting to the Internet

After power is applied, the Hughes 9250 terminal and antenna begin their startup sequence. The tracking 
antenna begins its search for the BGAN satellite. The antenna motors may be heard during this time. 

Refer to the 

Hughes 9250 Terminal User Guide

 included on the CD to learn more about how to use the 

Hughes 9250 Land Mobile Satellite Terminal.

Refer to the 

Hughes 9201 Terminal User Guide

 for instructions on how to connect a PC or Mac to the 

terminal. However, note the following differences/limitations between the 9201 and 9250 for internet 
connection and performance:

The antenna pointing procedure is bypassed. The Hughes 9250 terminal automatically registers with 
the network after the tracking antenna acquires the satellite signal.

The 9250 operates as a class-2 modem, that is, streaming class connection is limited to a maximum 
128 kbps data rate.

Only “best effort” performance can be expected under moving conditions due to the higher probability 
of obstruction of satellite signal and limitations of the current BGAN system. 

"Best effort" performance can also be expected with look angles lower than 20 degrees. 

Signal outages of more than 3 seconds cause circuit switched calls to drop and packet switched 
sessions to pause. User intervention may be required to reactivate connections for longer outage 
durations.

Beam-to-beam handover is not supported by the network until BGAN-X is completed.

The 9250 is fully BGAN-X Class 11 compatible with a software upgrade.

Customer support

Contact Hughes at (858) 452-4658

Coverage Map

The Hughes 9250 performs best in areas where the antenna elevation angle is 20 degrees or higher. Lower 
elevation angles increase the probability of signal outages caused by trees, buildings and hilly terrain and 
may severely impact the usability on the move. See the figure below for a rough estimate of elevation in 
your location.

Note: The 

antenna must have line of sight to the BGAN satellite to lock onto the 

satellite signal.

Содержание 9250











Отзывы: