If without obvious reasons the display for a particular channel goes
blank, press
[CHANNEL]
and
[MEMORY]
to enforce an im-
mediate search. If that fails, check if the remote unit. of that chan-
nel is still in place. Make sure the transmission is within range and
path is clear of obstacles and interference.
The temperature variance for
CHANNEL 1
for the past 12 hours
is automatically scanned on the screen in six equal columns.
The variance is represented in rows of degrees C above or below
the current temperature at 0 Hr (current time) and 0°C (no
CHANNEL
. .
l J
.
m - m - m -
: = . -
-5
1
.
The ice warning is selected on the
ICE WARNING
slide switch
on the main unit. The warning only applies to
CHANNEL 1.
To activate the warning, slide the switch to ON. When the tem-
perature recorded at
CHANNEL 1
falls to between -2°C
to
a beeping alarm will sound; the ice warning icon
and current outdoor temperature will flash. The alarm will
sound every minute so long as the recorded temperature is within
alarm range. To stop the alarm, press any key or change the chan-
nel. Display features will continue to flash as a reminder that the
temperature remains within the ice warning range.
To deactivate the ice warning function, slide the
ICE WARNING
switch to
OFF.
The unit of temperature display is selected on the
slide switch.
Select
for Centigrade or
for Fahrenheit.
Note that the remote temperature display on the main unit is domi-
nated by the selection on the
slide switch of the main unit.
Whatever the display units of the remote sensors are, they will be
automatically converted to the chosen one of the main unit.
When it is time to replace batteries, the respective
indicator
will show up when the respective channel is selected. The battery
level of the main unit will be shown on the indoor temperature
when it is running low.
Flip open the table stand to place the main unit on a flat surface. Or
you can flip close the stand and mount the unit on a wall using the
recessed hole.
As for the remote unit, it comes with a wall-mount holder and a
removable stand. Use either to hold the unit in place.
Содержание JTR 168 LR H
Страница 3: ......