manualshive.com logo in svg

Huffy BMX bicycles, Руководство пользователя

Поделиться
Скачать
Huffy BMX bicycles Скачать руководство пользователя страница 2

Owner’s Manual Index

Introduction

• Owner’s Bicycle Identifi cation Record ................................................... 3
• Fitting the Rider to the Bicycle ............................................................... 3
• Warning and Safety Information ............................................................ 4
• Freewheel Brakes .................................................................................. 4
• Refl ectors .............................................................................................. 4
• Rules of the Road .................................................................................. 4
• The Owner’s Responsibility ................................................................... 5

Components

• Part Assembly View ............................................................................... 6
• Parts Assembly List ............................................................................... 7

Assembly

• Introduction ............................................................................................ 8
• Tools Needed ......................................................................................... 8
• Assemble the Front Wheel to the Fork .................................................. 9
• Handlebar and Stem Installation - No Gyro Brakes .............................. 10
• Gyro Brake and Stem Setup - Rear Brake ........................................... 12
• Gyro Brake Setup - Front Brake Cable Install ...................................... 14
• Seat Installation (various models) ......................................................15/16
• Front and Rear Refl ector Installation .................................................... 18
• Pedal Installation .................................................................................. 19
• Testing Seat Clamp and Post Clamp Tightness ................................... 20
• Testing Stem and Handlebar Tightness ................................................ 21
• Brake System Setup and Adjustment ................................................... 22
• Coaster Brakes (various models) ......................................................... 26
• Pegs Installation ................................................................................... 27

Maintenance and Service

• Repair and Service ............................................................................... 28
• Chain Adjustment ................................................................................. 29
• Lubrication ............................................................................................ 30
• Lubrication Table................................................................................... 31
• Inspection of the Bearings .................................................................... 32
• Tires  ..................................................................................................... 33

Warranty

• Huffy Corporation Limited Warranty ..................................................... 34

Содержание BMX bicycles





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды