INITIAL SET-UP
This control device has been programmed for set-up with two levels
of security, the Administrator (Admin) level and the User level. The
Administrator has the ability to set and re-set passwords including the
User(s) password.
» Admin Function –
(Changing the User or Admin Password)
1. Touch the screen to activate the touchscreen.
2. Touch the Admin button (Fig. 3) and enter the password. The
factory default password is 1111.
3. Select Change User Password or Change Admin Password (Fig. 4).
4. Enter the New User or New Admin Password and also confirm the
User or Admin Password (Fig. 5). The password can be up to 7
digits of number characters.
5. Upon twice correctly entering the new password, select “OK” on the
confirmation screen to continue. (Fig 6.)
» Admin Password Reset –
(Factory Reset Admin Password)
CAUTION – Be careful with whom you share these instructions. It is not
recommended that these instructions be shared with employees who
have not been trained in operating this movable wall system. In the
event that the Admin password has been forgotten or misplaced, follow
these instructions to initiate a password reset:
1. Touch the screen to activate the touchscreen.
2. In the upper left corner of the Password screen (Fig. 7), press and
hold for 7 seconds. The screen will turn “light blue” in color while
you press it.
3. The Factory Reset Admin Password screen will appear (Fig. 8).
Press the Factory Reset Admin Password button. A confirmation
screen will pop up asking to confirm the reset. Once that is
confirmed, the Admin password will be changed to the factory
default password of 1111.
Fig. 3
Fig. 4
Fig. 5
Fig. 7
Fig. 6
Fig. 8
