Huepar LR-5RG, Руководство пользователя

Страница: 9 / 88

-7-
Power ON/OFF
•
Power ON: Press to turn the receiver ON.
※ Note: When powered on, all the icons will be displayed on the LCD
screen to ensure the LCD is functioning properly.
Illuminate LCD
•
When powered ON, press to turn ON / OFF LCD illumination.
Accuracy
• When powered ON, the accuracy setting FINE is set, press to
switch accuracy setting between FINE and MEDIUM .
Operation
※ Note:
Please turn on the
Pulse Mode
of the laser level when using
with the receiver. The receiver can ONLY be used in Pulse Mode.
•
Power OFF: Press again to turn the receiver OFF
.
※ Note: When no laser beam reaches the laser reception window (5) for
10 minutes, the receiver will automatically switch off in order to save the
battery.
MEDIUM adjustment
FINE adjustment
※ Note:
•
MEDIUM accuracy setting should be selected only when a stable laser
beam cannot be obtained due to slight vibrations at or near the work site.
•
If the point to be measured is at a long distance, the MEDIUM accuracy
setting is necessary because heat waves or slight vibrations may
interfere with obtaining a stable laser beam.
Speaker Volume
• When powered ON, the default volume setting is LOUD, to change the
volume level or switch off the audio signal, press .