Hudl Tablet, Руководство пользователя

Страница: 80 / 82

80
9. I can’t access the files I have stored on my micro-SD card
Your card might not be fully inserted into your Hudl.
To fix try the following steps
1 Turn off your Hudl
To turn your Hudl off hold down the smaller of the
buttons on the side of your Hudl. Then tap ‘Power
off’ as shown below.
2 When your Hudl is off remove your micro-SD
card by carefully pushing the edge of it back into
your Hudl. Your card will then pop out a little so
that you can remove it.
3 Put your micro-SD card back into your Hudl.
Push it into your Hudl until it ‘clicks’ into place. You
should barely be able to see it when in place.
3 When its in, turn your Hudl back on.
Turn your Hudl on by holding down the smaller of the
buttons on the side of your Hudl until the star appears
on the screen. This may take a few seconds.
4 Now try and access the files on your micro-SD card.
If you still can’t access the files, check that the card
is working properly by plugging it into your computer.
If this doesn’t work there may be an issue with your
micro-SD card.