4
User Instructions
The USB to PoE Adapter is made to easily connect an
Ethernet device to a host computer using USB-C. The USB
to PoE Adapter can also provide 37-57V DC power to a con-
nected Ethernet device. Power to the Adapter is provided
from the USB host or the included 5V DC adapter.
Installation
Connect the Ethernet device and the USB to PoE Adapter
using minimum a Cat5e rated Ethernet cable. Further connect
the USB to PoE Adapter to a USB host.
The status LED will light up when the USB is connected. If the
LED is white, the Adapter has sufficient power. Otherwise, if
the status LED is red, connect the included power adapter.
A wall mount bracket with double sided tape is included.
To install the bracket, remove the tape liner and place the
bracket in a suitable position, not higher than 2m, and on a
clean smooth surface.
Attach the USB to PoE Adapter to the wall mount bracket and
ensure that the unit is properly locked in position around the
mounting plate. Magnetic surfaces can generally be used to
mount the USB to PoE Adapter. Optionally, place the Adapter
directly on any horizontal surface.
The USB to PoE Adapter wall bracket is designed to hold
Huddly the USB to PoE Adapter only. It should not be used
as support for any additional weight.
