DATA SHEET
HuddleCamHD Camera Specifications
Rear Board Connectors
High Definition Interface USB 3.0
Controller Signal Interface Mini DIN-8 (VISCA IN, VISCA OUT/RS485)
Controller Signal Config. Dip-Switch Pin 7/TTL Signal
Baud Rate
9600 bds
Power Supply Interface DC 12V 2A
Pan/Tilt Movement
Pan Movement ±355°
Tilt Rotation up 90°, down 45°
Presets
64 Presets
Physical
Material Aluminum, Plastic
Dimensions 5.68”W x 6.38”H x 5.88”D (7.13” H w/ tilt up)
(W x H x D) mm 139mm x 152mm x 165mm (181mm H w/ tilt up)
Camera Weight 2.10 lbs (.95 kg)
Box Dimensions 11.86”x9.25”x9.5” (336mm x 234mm x 241mm)
Boxed Weight 5.50 lbs (2.49 kg)
Operating Temperature 32°F to + 113°F (0°C to 45°C)
Color Silver Gray
Electrical Index
Power Supply Adapter 12V DC 2A
Input Voltage 12V DC (10.5-14V DC)
Input Power
24W (Max)
Working Enviornment
Indoor
Remote Contol
Still have questions?
Give us a call.
Preset Positions
1-9: Preset Positions
Set: Setting Preset Position
Clear: Clear Preset Position
Call: Call Preset Position
Note: If you want to set (or call) the first
preset position to 1, you should press
number key “1”, then press
“Set” (or “Call”) to set (call) the position
Additional Function Zone
Freeze: Image Freeze
BL: Back-light Compensation
WB: White Balance
AE: Auto Exposure
D Zoom: Digital Zoom
Reset
Restarts the camera
and restores it to Factory Default
settings. (Note: Will delete all memory)
Camera Selection
Select Camera ID: 1, 2 or 3
1.
2.
3.
Fast Zoom in/out Control Zone
+ : Zoom in quickly
- : Zoom out quickly
Pan/Tilt Controller
Move Up
Move Down
Move Left
Move Right
Auto Pan
4.
5.
6.
OSD Menu Zone
Dome OSD: Enter Pan Tilt Zoom OSD menu
Lens OSD: Enter lens OSD menu
Slow Zoom In/Out Zone
+ : Zoom in slowly
- : Zoom out slowly
Power Supply Switch
Switch for turning camera on
(i.e. Stand-By mode vs. Working mode)
7.
8.
9.
10.
Focus Control Zone
Auto: Turn on auto focus
Manual: Turn on manual focus
Far: Set focus at farther distance
Near: Set focus at nearer distance
11.
Pan/Tilt Function Zone
L-Limit: Set left boundary limit scanning position
Scan: Enable Boundary Scanning (Auto Panning)
R-Limit: Set right boundary limit scanning position
Home: Go to camera’s Home position
Tour: Enable automatic patrol tour of presets
Rev: Enable image flip for ceiling mounting
2
152 Robbins Road Downingtown, PA 19335 HuddleCamHD.com 800-486-5276
Quality Management System
Certified ISO9001: 2008
Rev 1.2 9/15
