Huck Rebel 2022, Руководство пользователя, Страница: 30 / 42

brakes and brake pads
Unscrew the pin on the top of the caliper body with a number 3
Allen key, remove the end clip and pull the pin out.
Remove the brake pads from the top of the caliper and discard.
Guide new brake pads in, from the top of the caliper, until the holes
line up. Do not touch the pad surface with your skin.
Re-install the fastening pin and tighten with the Allen key. Replace
the end clip
THE MOST COMMON MAINTENANCE ITEM
The bike includes front and rear hydraulic disk brakes, operated by
levers on the handlebars. Brake pads typically need changing every 4-6
months but depending on your riding style you may require changes
more often.
Ensuring your brake pads are in good condition is critical to your safety.
Check the brake pads regularly, especially when a lot of heavy braking
has occurred. Replacement brake pads are available at huckcycles.com
To replace the brake pads:
1.
2.
3.
maintenance
OWNERS MANUAL
|
2022.
|
30
WARNING
Brake rotors get hot during braking. Allow sufficient time for
brakes to cool before touching or doing any maintenance.
Brake Calipers
While the brake calipers are made for a motorcycle class bike, and
are very durable for the riding style of the Rebel, it is possible that
debris, sand or salt may get into them. If you hear a sudden noise
or feel a throbbing the brakes when squeezed, you may have
something caught in them. Please come to a stop and check them
immediately for damage or debris.
Brake Fluid
Your Rebel comes with a clear brake fluid reservoir full with DOT
4 brake fluid. This should last you 4-6 months, however, the life of
the fluid will depend on your braking style. To add more fluid
simply remove the top cap from the reservoir and add the
appropriate amount of DOT 4 fluid.
Watch our DIY video for more information.