©
2010 by Huchez Treuils S.A.S.
Original instruction manual
6
UK
All rights reserved
4.3 Installing the rope
On the Manistor® 100:
Remove the handle 1, remove the screws 2a and 2b, as well as the protection washer 3. Release the
screws 4a and 4b. Pass the rope through the drum via the opening 5, the rope will come out through the
opening 6. Place the rope in the groove 7 ensuring that it does not go beyond the surface 8. Tighten the
rope by tightening the screws 4a and 4b
(do not use a screw gun )
. Put the washer 3, the screws 2a and 2b
and the handle back on.
On the Manistor® 200:
Remove the handle 11, remove the screws 12a, 12b, 12c and 12d as well as the cover 13. Remove the
drum from the winch.
Remove the screws 14a and 14b, as well as the protection washer 15.
