15 | 36
OWNERS MANUAL | Cobolt Modulated DPSS Lasers | D0342-C JUNE 2016
Operation and Environmental Specifications – Laser Head
Power supply
12 VDC, 3.75 A, 11-28 VDC accepted
Power consumption, total system (Laser Head + Controller)
<25 W (typical ~15 W)
< 35 W (typical ~25 W) *
Maximum heat dissipation of Laser Head
<15 W (typical ~10 W)
< 25 W (typical ~15 W) *
Maximum Laser Head baseplate temperature
50
º
C
Ambient temperature, operation
10-40
º
C
Ambient temperature, storage
0-60
º
C
Warm-up time, from OFF
< 3 min
Humidity
0-90% RH non-condensing
Ambient Air pressure
950-1050 mbar
Heat sink thermal resistance, Laser Head
<0.6 K/W
<0.4 K/W *
* Applies to high power models: Calypso 80 mW, Samba 240 mW, Samba 320mW, Jive 160 mW, Mambo 80mW, Flamenco 80 mW
Operation and Environmental Specifications – AOM Driver
Power supply
24VDC, 1.25A
Power consumption
< 12 W
Ambient temperature, operation*
10–40°C (max T
case
55°C)
Ambient temperature, storage
-40°C - +50°C, non-condensing
Heat sink thermal resistance, AOM driver
<1.2 K/W
Warm-up time
10 min
Electrical Interfaces - Controller
Interfaces
Connector
Function
Input power
Kycon KPJX-45, 4-pin
Power supply to Controller
Laser Head to Controller
HD-sub 26-pin, male
Connection to Laser Head
Controller to Laser Head
HD-sub 26-pin, female Connection to Controller
Data port
USB-type mini B
Control and monitoring via control commands
Remote interlock &
Analog signals
Molex 90130-3206
Analog input 5 – 12 V => Laser ON
Analog input <2.7 V => Laser OFF
Warm-up time
2 min
