Hubert HUBM-2F Series, Руководство по обслуживанию, установке и уходу

Страница: 8 / 12

8
Service, Installation and Care Manual
MAINTENANCE (CONTINUED)
SWING DOOR REPLACEMENT AND ADJUSTMENT
1. Visually inspect the exterior of the package and skid or container. Any damage should be noted and
reported to the delivering carrier immediately.
2. If damaged, open and inspect the contents with the carrier.
3. In the event that the exterior is not damaged, yet upon opening, there is concealed damage to the
equipment, notify the carrier. Notification should be made verbally as well as in
written form.
4. Request an inspection by the shipping company of the damaged equipment. This should be done within
10 days from receipt of the equipment.
5. Be certain to check the compressor compartment housing and visually inspect the refrigeration package.
Be sure lines are secure and base is still intact.
REMOVE THE BOTTOM PANEL
Loosen and remove the top screws, slide the panel up and out.
LIGHT BULB REPLACEMENT
1. Upper light bulb replacement: Loosen the screws in the bottom of the top panel and swing the panel up
until the light bulb is exposed. Light bulb can then be changed.
2. LED light bulb replacement: Take the cover off to replace the LED light bulb.