Hubert HUBM-23FB, Руководство по обслуживанию, установке и эксплуатации

Страница: 6 / 12

SOLID-STATE THERMOSTAT DESCRIPTIONS
1. FRONT PANEL COMMANDS
1.1 KEY FUNCTION
To display target set point; in programming mode it selects a parameter or
confirms an operation.
To start a manual defrost
To see the last temperature alarm; in programming mode it browses the
parameter codes or increases the display value
To see the last temperature alarm; in programming mode it browses the
parameter codes or decreases the display value
KEY COMBINATION
To lock & unlock the keyboard
To enter programming mode
To return to the room temperature display
LED MODE FUNCTION
ON Compressor Enabled
Flashing
Programming Phase
Anti-short cycle delay enabled
ON Defrost Enabled
Flashing
Programming Phase
Drip time in progress
ON Fans Enabled
Flashing Fans delay after defrost in progress
ON A temperature alarm happens
1.2 LEDS
5