Huberg EX-PEX PLUS, Руководство пользователя

Страница: 17 / 21

Form creation date: 01.04.2008 - SpKa
Document creation date: 03.10.2019- RC
17/21
7 7 APPENDIX A – SAFE USE OF THE INSTRUMENT
INTRODUCTION
This safety instruction is for installing, working and for the maintains of the gas leak detector
instrument RIVELGAS/EXPEX type and for use it in areas with potentially explosive atmospheres. The
equipment covered by these instructions is characterized by the following marking:
II 2G Ex ib d IIC T4 Gb
The information contained in these safety instructions must be followed in addition to the warnings
in the user manual supplied to the customer.
GENERAL
Instrumentation equipped with battery and sensors for the detection of gas leaks. Used for the
detection of leaks on the gas meters and in the distribution gas network, and finally how to use it for
personal safety.
INSTALLATION
Suitability of equipment into installation site
In the case of use in areas with danger of explosion must verify that the type of detector is suitable at
the classification of the area and at the flammable substances in the system. The essential requirements
of security against the risk of explosion in dangerous areas are established by the European Directive
2014/34/EU (in respect of equipment) and 1999/92/CE of 16 December 1999 (as regards facilities). The
criteria for classifying areas at risk of explosion are explained in the norm EN60079-10. The technical
requirements of electrical installations in dangerous areas are established in the EN60079-14.
In the label on the instrument, in addition to functional data, there are also a referred to the
references to the notified responsible for certification.