Document: DOC-0000736636 / Date of publication: 04.04.2016 / uncontrolled copy
page 2/2
Instruction
Quick-Fit plus preparing tool 74_Z-0-12-18 for
½” annular cables
Access blade unit position
This position provides easy access to the blade
unit section for inspection, maintenance and
replacement purposes.
Remove blade unit
Raise carefully the blade unit by means of a
fitting screw-driver. Remove the blade unit.
Blades are fully accessible.
Insert blade unit
Insert / re-insert / replace the required blade unit
carefully in the correct position.
Blades are fully accessible.
Check position of blade unit
Make sure that the blade unit is properly inserted
again and in the final stop position.
Assemble base tool
Join the base tool part with the grip part in the
correct position. If required, turn the base tool
part a little in radial direction until the axial
position allows the compete joining.
Lock base tool
Make sure that the base tool part reached the
final position and the lock-mechanism (latch) is
locked properly. Check by means of a slight
counter-movement.
For assembly instruction with full product range, please visit –
www.hubersuhner.com/QuickFitPlus
HUBER+SUHNER is certified according to ISO 9001, ISO 14001, ISO/TS 16949 und IRIS
www.hubersuhner.com
Waiver
: It is exclusively in written agreements that we provide our customers with warrants and representations as to the technical specifications and/or the fitness for any
particular purpose. The facts and figures contained herein are carefully compiled to the best of our knowledge, but they are intended for general informational purposes only.
