12
Getting Started
Note:
Each pole is connected with power the cord inside, handle the power cord with
care when removing the poles from the box and during installation.
• The Top clamp is set for vertical clamping on the top rail of the cot, to
clamp horizontally on the slats of the cot, unfasten and remove the small
knob completely from the Top Clamp assembly (Dia.2a), remove the Top
Clamp from the assembly and re-orient the Top Clamp with the long open
end pointing left in the horizontal position(Dia. 2b), then reinsert into the
assembly, tighten the small knob until the Top Clamp is securely locked.
• Fasten the top clamp either vertically on the upper rail or the slats
horizontally. (Dia 2c, 2d)
Dia 2a
Dia 2b
Dia 2c
Dia 2d